Friday, September 6, 2019

The Current Status of Women in Middle East Countries Essay Example for Free

The Current Status of Women in Middle East Countries Essay Part I: Reasons why women are reaching a stagnant point in the Arab countries and how this could possibly change:   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   According to feminists, the current status of women in Middle East countries is strongly attributed to state policies.   Scholarly information from studies conducted on the status of Middle East women have indicated that the changes that have taken place in the legal status of women and in their social placement in society have very much been determined by the changes taking place in political constitution of various states and regimes. The status of women and gender relations have also been equally determined by other factors like class structure, economic and demographic characteristic Religion can also not be ruled out as it has tremendous influence on the system of governance in many countries in this region.   Revolutionary projects carried out in Iran and Afghanistan but which did not yield good results act as a clear guideline on the status of women in Arab countries.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The societies in the Arab world are predominantly patriarchal.   The role of a woman as wife and mother is still held with a lot of esteem in these societies.   Women are reproducers, educators of children and socialisers whereby they are responsible for implementing societal and cultural values in the young ones. These societies are also predominantly Islamic, a religion that still holds the family as the most fundamental unit of society and places greet responsibility on women about raising devout Muslims as well as transmitting cultural values.   Child bearing is therefore the central labor activity for the females while the men are responsible for the general upkeep of the family.   The place of the woman in a Muslim society therefore remains the home and the activities surrounding it. Muslim family law also gives the male members of the society extensive control over key decisions affecting the life of the women under their control for example in issues concerning marriage, education, business and mobility. Women in the Arab countries are still subjected to some form of subordination to the males and restrictive codes of behavior that govern their lives. There is sex segregation towards women and family honor is closely associated with female virtue.   As a result any attempts to change family virtues or the family structure has often met with a lot of resistance in the Arab world especially from revolutionary groups that have been operating under the concept of defending Islam such as the Taliban in Afghanistan.   Tribal-Islamist opposition groups also play a major role in opposing any attempts to change the status of women in these societies.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   In the Arab countries, marriage is still predominantly an agreement between families rather than between two individuals who hold equal rights in society. A husband has absolute rights over his wife’s body and such issues as marital rape are not recognized. Women are therefore still under male control and any attempt to achieve in their social status is viewed as resistance to made dominance.   The community has tremendous influence over a woman’s life in Arab countries a factor that can be seen in the societies refusal to do away with the veil even at a time when civilization has advanced in these countries.   As a result, the veil has widely been viewed as a civilizational threat to the position of the modern woman in society.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Wars that characterize several Arab nations have also been a threat to the status of women.   This is because even after their husbands have been recruited and probably died in war, women especially in the poor backgrounds cannot freely venture out to fed for their families and they still have to rely on male members of the family such as the older sons. This has subjected the women and their children to a lot of unnecessary suffering. There has also been a tendency in these nations to limit the political exposure of women, a factor that has resulted from the concept of male dominance in these societies.   In such a way, it has been difficult for women to push for change as society still holds views that their position should be in the house.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   A lot can be done to assist the women and improve their status in society.   Women for example should be given freedom in education.  Ã‚   This is because modernization demands more labor in high profile jobs. Wars should be a great lesson and women should be given a chance of being economically stable to avoid desperate situations in the event of the death of the family’s breadwinner during war.   Education will also give women better chances of employment and produce women who are able to strongly advocate for change in society.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Because family law in Arab nations greatly determines state and legal policies relating to gender and family matters,   perhaps these laws should be reviewed to give the women more influence in the family and society.   Various Arab governments should also give attention to demands by women on the improvement of their political, civil and social rights. Part II: Authoritative governments and the rise of fundamental Muslim groups   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   In the Arab world, the main religion is predominantly Islam, a religion that has played a major role in determining the political, social and civil structures in these nations. Religious and state matters are intertwined in such a way that it becomes difficult to make a clear distinction between the two. Islamic law applies to every aspect of life in the Arab nations ranging from matters related to everyday life, to state matters such as the system of governance and even foreign relations.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   With modernization, the Muslim world has come into contact with the Western world, an aspect that has led to mixed reactions in different Arab nations. This is as a result of the major economic, political and social-cultural developments that have resulted from this type of contact. In most of the Muslim countries the political systems are based on Islamic laws derived from the Quran and this has resulted in the concept of Islamic States through which Arab countries want to exert their influence and change the Western culture to conform to Islamic way of life. There has also been widespread resistance to Western influence and these factors have led to the rise of Islamic fundamentalism. A strive has risen among the Arabs between those who feel that Islam should determine the political culture of the Arab nations and those who prefer secular governments that have institutions modeled on Western governments. Islamic fundamentalist feel that Arab governments have established state constitutions that are too compliant with other religions or doctrines. It is therefore the ultimate goal of Islamic political fundamentalists to overthrow these secular states in a bid to achieve national dominance in the political system.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Islamic fundamentalist movements have been modeled upon the Muslim Brotherhood of Egypt began in 1928 that provided such movements with directives on the way forward in achieving political dominance through the implementation of the Sharia law. Even though composed of a minority of Muslims, Islamic fundamentalists have had varied political achievements in various nations. Good examples of such groups are the Wahhabi in Saudi Arabia and the Taliban in Afghanistan where strict Islamic law has been used to eradicate any form of Western influence. In Sudan, the efforts by the Muslim brotherhood to uphold Sharia law since independence in that nation in 1956 has led to a long civil war between the Islamic North and the Christain south.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   In Egypt, the Muslim Brotherhood captures 20 percent of the seats in civic elections held in the later part of 2005. Turkey is ruled by an Islamist party that appears to accommodate democratic ideals. But since the September 11 attacks in the United States, growing concern has risen within the international community over the current situation in the Arab countries regarding religious reform and the prospect of Islamist fundamentalists having a share in political power. This is because of extremist groups that have resulted to terrorism as a means of achieving their goals. A good number of the countries in the Middle East are governed by autocratic regimes opposed to these Islamist movements. An attempt by such groups to gain political power has often been suppressed by denying them a popular vote in the governments and by exercising brutality against their leaders and followers. This is because of the tendency by these groups to result to violence as a means of airing their grievances and achieving their goals. Such violence has led to abduction of Western hostages, bomb attacks on the US Embassies in countries like Kenya and Tanzania and the September 11 attack in the US.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Islamic fundamentalists   originally aimed at achieving political goals through peaceful means but the refusal of Islamic governments to recognize their existence and the attempt to suppress these movements is what may have led to the emergence of extremist groups. The Muslim Brotherhood in Egypt has however maintained peaceful means in dealing with the government an aspect that has helped the movement to rise into a political party with a strong following. The future of such groups is however threatened by the fight against terrorism and whether they will achieve in maintaining strict Muslim states is yet to be determined by the course that political events in the Arab world will take and the relations between these Arab nations and the West. Part III The lack of unification between the Arab countries has its benefits in regards to Preservation of culture but it is a hindrance to their potential political force Culture in any community plays a role of utmost importance particularly in preserving the identity of any community. Like everywhere else in the world, the movement of people in and out of the Muslim world has increased cultural integration. Colonial occupation in the Arab countries served to expand these cultural influences bringing in the process of westernization. However the Arab countries have more than any other group of nations succeeded in keeping both external and internal influences at minimal levels. These countries have thus managed to retain their individual cultures to large extent.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   From Egypt to Syria, the rise of Arabism was largely as a result of resistance to the colonial occupation mainly the British occupation. This growing force promised to unite Arab nations on the principles of nationalism as well as religion of Islam. This resulted in the expansion of state, missionary and private education (Moaddel, M., 53). However the cultural distance between the components of the Arab world would not allow for significant integration. This has to this day served to retain the cultural composition of the member countries. The lack of unity in the Arab countries has therefore served to preserve culture.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The biggest loss that is as a result of this disunity is however the loss of political forces that would have defined the Arab countries as a force to be reckoned with. The leadership’s radical difference in ideologies has made any meaningful integration difficult. A phenomenon akin to divide and rule has therefore been employed repeatedly by the western powers to further influence the political direction in the Arab World. This has worked against the region since it still remains on the shadows when political force is called for in order to change direction of the world.       Works Cited: Are Knusden. Political Islam in the Middle East R 2003:3 Chr. Michelsen Institute Development Studies and Human Rights Moaddel, Mansoor. Islamic Modernism, Nationalism and Fundamentalism. Chicago. University of Chicago Press.

Thursday, September 5, 2019

Identifying Problems When Obtaining Population Parameters

Identifying Problems When Obtaining Population Parameters We estimate population parameters, such as the mean, based on the sample statistics. It is difficult to get a precise value or point estimation of these figures. A more practical and informative approach is to find a range of values in which we expect the population parameters will fall. Such a range of values is called a confidence interval. 1. CONFIDENCE INTERVAL Definition The confidence interval is a range of values constructed from sample data so that the population parameter is likely to occur within that range at a specified probability. The specified probability is called the level of confidence. The shape of the probability distribution of the sample mean allows us to specify an interval of specific probability that the population mean,  µ, will fall into. 1.1 Large Sample Or Standard Deviation Is Known Case 1: The standard deviation à Ã†â€™ is known; or It is a large sample (i.e. at least 30 observations). The Central Limit Theorem states that the sampling distribution of the sample means is approximately normal. We can use the tables in the Appendix to find the appropriate Z value. Key Points The standard normal distribution allows us to draw the following conclusions: 68% of the sample means will be within 1 standard deviations of the population mean,  µ. 95% of the sample means will be within 1.96 standard deviations of the population mean,  µ. 99% of the sample means will lie within 2.58 standard deviations of the population mean. These intervals are called the confidence interval. The standard deviation above (i.e. the standard error) is referring to the standard deviation of the sampling distribution of the sample mean. Locating 0.475 in the body of the table, read the corresponding row and column values, the value is 1.96. Thus, the probability of finding a Z value between 0 and 1.96 is 0.475. Likewise, the probability of being in the interval between -1.96 and 0 is also 0.475. When we combine these two, the probability of being in the interval of -1.96 to 1.96 is therefore 0.95. 1.1.1 How do you compute a 95% confidence interval? Assume our research involves the annual starting salary of business graduates in a local university. The sample mean is $39,000, while the standard deviation of the sample mean is $250. Assume our sample contains more than 30 observations. The 95% confidence interval is between $38,510 and $39,490. Found by $39,000 +/- 1.96($250) In most situations, the population standard deviation is not available, so we estimate it as follows: (Standard Error) Conclusions: 95% confidence interval 99% confidence interval Confidence interval for the population mean (n > 30) Z depends on confidence level Example 1 The Hong Kong Tourist Association wishes to have information on the mean annual income of tour guides. A random sample of 150 tour guides reveals a sample mean of $45,420. The standard deviation of this sample is $2,050. The association would like answers to the following questions: (a) What is the population mean? The best estimate of the unknown population value is the corresponding sample statistic. The sample mean of $45,420 is a point estimate of the unknown population mean. (b) What is a reasonable range of values for population mean? The Association decides to use the 95% level of confidence. To determine the corresponding confidence interval, we use the formula: The endpoints would be $45,169 and $45,671 and they are called confidence limits. We could expect about 95% of these confidence intervals contain the population mean. About 5% of the intervals would not contain the population mean annual income, i.e. the  µ. Figure 2 Probability distribution of population mean 1.2 Small Sample Or Standard Deviation Is Unknown Case 2: The sample is small (i.e. less than 30 observations) or, the population standard deviation is not known. The correct statistical procedure is to replace the standard normal distribution with the t distribution. The t distribution is a continuous distribution with many similarities to the standard normal distribution. 1.2.1 Standard normal distribution versus t distribution Figure 3 Z distribution versus t distribution The t distribution is flatter and more spread out than the standard normal distribution. The standard deviation of the t distribution is larger than the normal distribution. Confidence interval for a sample with unknown population mean, à Ã†â€™. The confidence interval is Assume the sample is from a normal population. Estimate the population standard deviation (à Ã†â€™) with the sample standard deviation (s). Use t distribution rather than the Z distribution. Example 2 A shoe maker wants to investigate the useful life of his products. A sample of 10 pairs of shoes that had been walked for 50,000 km showed a sample mean of 0.32 inch of sole remaining with a standard deviation of 0.09 cm. Constructing a 95% confidence interval for the population mean, would it be reasonable for the manufacturer to conclude that after 50,000 km the population mean amount of sole remaining is 0.3 cm? Assume the population distribution is normal. The sample standard deviation is 0.09 cm. There are only 10 observations and hence, we use t distribution Estimation: = 0.32, s = 0.09, and n = 10. Step 1: Locate t by moving across the row for the level of confidence required (i.e. 95%). Step 2: The column on the left margin is identified as df. This refers to the number of degrees of freedom. The number of degree of freedom is the number of observations in the sample minus the number of samples, written n-1.(i.e. 10-1=9). Step 3: Confidence Interval = The endpoints of the confidence interval are 0.256 and 0.384. Step 4: Interpretation the manufacturer can be reasonably sure (95% confident) that the mean remaining tread depth is between 0.256 and 0.384 cm. Because 0.3 is in this interval, it is possible that the mean of the population is 0.3. 2. CHOOSING AN APPROPRIATE SAMPLE SIZE The necessary sample size depends on three factors: Level of confidence wanted: To increase level of confidence, increase n. Margin of error the researcher will tolerate: To reduce allowable error, increase n. Variability in the population being studied: For a more widely dispersed sample, increase n. We can express the interaction among these three factors and the sample size in the following formula: Sample size for estimating the population mean, Note: n: Sample size Z: Standard normal value S: Estimate of population standard deviation E: Maximum allowable error Example 3 An accounting student wants to know the mean amount that independent directors of small companies earn per month as remuneration for being a director. The error in estimating the mean is to be less than $100 with a 95% level of confidence. The student found a report by the government that estimated the standard deviation to be $1000. What is the required sample size? Maximum allowable error, E, is $100. Value of Z for a 95% level of confidence is 1.96, and the estimate of the standard deviation is $1000. Substitute into , we get n = [ (1.96) (1000) ] 2 = 19.62 = 384.16 100 The sample of 385 is required to meet the requirements. If the students want to increase the level of confidence, e.g. 99%, this requires a larger sample. Z = 2.58, so n = [ (2.58) (1000) ] 2 = 25.82 = 665.64 100 Sample = 666 3. WHAT IS A HYPOTHESIS? Definitions Hypothesis is a statement about a population parameter developed for the purpose of testing. Hypothesis testing is a procedure based on sample evidence and probability theory to determine whether the hypothesis is a reasonable statement. In statistical analysis, we always make a claim about the population parameters, i.e. a hypothesis. We collect data and then use the data to test the assertion. 4.1 Five-Step Procedure For Testing A Hypothesis Figure 4 How to test a hypothesis 4.1.1 Step 1: State null hypothesis (H0) and alternative hypothesis (H1) The first step is to state the hypothesis being tested. It is called the null hypothesis. We either reject or fail to reject the null hypothesis. Failing to reject the null hypothesis does not prove that H0 is true. The null hypothesis is a statement that is not rejected unless our sample data provide convincing evidence that it is false. The alternative hypothesis is a statement that is accepted if the sample data provide sufficient evidence that the null hypothesis is false. Example 4 A journal has disclosed that the mean age of commercial helicopters is 15 years. A statistical test of this statement would first need to determine the null and the alternate hypotheses. The null hypothesis represents the current or reported condition. It is written H0:  µ = 15. The alternate hypothesis is that the statement is not true, i.e. H1:  µ à ¢Ã¢â‚¬ °Ã‚   15. 4.1.2 Step 2: Select a level of significance The level of significance is the probability of rejecting the null hypothesis when it is true. A decision is made to use the 5% level, 1% level, 10% level or any other level between 0 and 1. We must decide on the level of significance before formulating a decision rule and collecting sample data. Type I error: Rejecting the null hypothesis, H0, when it is true. Type II error: Accepting the null hypothesis when it is false. Example 5 Suppose AA Watch Ltd has informed bracelet suppliers to bid for contract on the supply of a large amount of bracelets. Suppliers with the lowest bid will be awarded a sizable contract. Suppose the contract specifies that the watch producers quality-assurance department will take samples of the shipment. H0: The shipment of bracelet contains 6% or less substandard bracelets. H1: More than 6% of the boards are defective. A sample of 50 bracelets received August 2 from BB Metals Ltd revealed that four bracelets, or 8%, were substandard. The shipment was rejected because it exceeded the maximum of 6% substandard bracelets. If the shipment was actually substandard, the decision to return the bracelets to the supplier was correct. However, suppose the four substandard bracelets selected in the sample of 50 were the only substandard bracelets in the shipment of 4,000 bracelets. Then only 1/10 of 1% were defective (4/4000 = 0.001). In that case, less than 6% of the entire shipment was substandard and rejecting the shipment was an error. We may have rejected the null hypothesis that the shipment was not substandard when we should have accepted the null hypothesis. By rejecting a true null hypothesis, we committed a Type I error. AA Watch Ltd would commit a Type II error if, unknown to the company an incoming shipment of bracelet from BB Metals Ltd contained 15% substandard bracelets, yet the shipment was accepted. How could this happen? Suppose two out of the 50 bracelets in the sample (4%) tested were substandard, and 48 out of the 50 were good bracelets. As the sample contained less than 6% substandard bracelets, the shipment was accepted but it could be purely by chance that the 48 good bracelets selected in the sample were the only acceptable ones in the entire shipment. In conclusion: Null Hypothesis Accepts H0 Rejects H0 H0 is true Correct decision Type I error H0 is false Type II error Correct decision 4.1.3 Step 3: Select the test statistics There are many test statistics. In this chapter, we use both Z and t as the test statistic. Definition A test statistic is a value, determined from sample information, used to determine whether to reject the null hypothesis. In hypothesis testing for the mean ( µ) when à Ã†â€™ is known or the sample size is large, the test statistic Z is computed by: The Z value is based on the sampling distribution of , which follows the normal distribution when the sample is reasonably large with a mean () equal to  µ, and a standard deviation , which is equal to . We can thus determine whether the difference between and  µ is statistically significant by finding the number of standard deviations is from  µ, using the formula above. 4.1.4 Step 4: Formulate the decision rule Definition A decision rule is a statement of the specific conditions under which the null hypothesis is rejected and the conditions under which it is not rejected. The region or area of rejection defines the location of all those values that are so large or so small that the probability of their occurrence under a true null hypothesis is rather remote. The area where the null hypothesis is not rejected is to the left of 1.65. The area of rejection is to the right of 1.65. A one-tailed test is being applied. The 0.05 level of significance was chosen. The sampling distribution of the statistic Z is normally distributed. The value 1.65 separates the regions where the null hypothesis is rejected and where it is not rejected. The value 1.65 is the critical value. The critical value is the dividing point between the region where the null hypothesis is rejected and the region where it is not rejected. Figure 5 Area of rejection for the null hypothesis 4.1.5 Step 5: Make a decision The final step in hypothesis testing is computing the test statistic, comparing it to the critical value, and making a decision to reject or not to reject the null hypothesis. Based on the information, Z is computed to be 2.34, the null hypothesis is rejected at the 0.05 level of significance. The decision to reject H0 was made because 2.34 lies in the region of rejection, i.e. beyond 1.65. We would reject the null hypothesis, reasoning that it is highly improbable that a computed Z value this large is due to sampling variation. Had the computed value been 1.65 or less, say 0.71, the null hypothesis would not be rejected. It would be reasoned that such a small computed value could be attributed to chance. Example 6 A large car leasing company wants to buy tires that average about 60,000 km of wear under normal usage. The company will, therefore, reject a shipment of tires if tests reveal that the life of the tires is significantly below 60,000 km on the average. The company would be glad to accept a shipment if the mean life is greater than 60,000 km. However, it is more concerned that it will have sample evidence to conclude that the tires will average less than 60,000 km of useful life. Thus, the test is set up to satisfy the concern of the car leasers that the mean life of the tires is less than 60,000 km. The null and alternate hypotheses in this case are written H0:  µ à ¢Ã¢â‚¬ °Ã‚ ¥ 60,000 and H1:  µ In this problem, the rejection region is pointing to the left, and is therefore in the left tail. Summary: If H1 states a direction, we use a one-tailed test. If no direction is specified in the alternate hypothesis, we use a two-tailed test. Figure 6 One-tailed test 5. TESTING FOR POPULATION MEAN WITH KNOWN POPULATION STANDARD DEVIATION 5.1 Two-tailed Test ABC Watch Ltd manufactures luxury watches at several plants in Europe. The weekly output of the Model A33 watch at the Swiss Plant is normally distributed, with a mean of 200 and a standard deviation of 16. Recently, because of market expansion, mechanisation has been introduced and employees laid off. The CEO would like to investigate whether there has been a change in the weekly production of the Model A33 watch. To put it another way, is the mean output at Swiss Plant different from 200 at the 0.01 significant levels? 5.1.1 Step 1: State null hypothesis and alternate hypothesis The null hypothesis is The population mean is 200. H0:  µ = 200. The alternate hypothesis is The mean is different from 200. H1:  µ à ¢Ã¢â‚¬ °Ã‚   200. 5.1.2 Step 2: Select the level of significance The 0.01 level of significance is used. This is ÃŽÂ ±, the probability of committing a Type I error, and it is the probability of rejecting a true null hypothesis. 5.1.3 Step 3: Select the test statistic The test statistic for the mean of a large sample is Z. Figure 7 Normalise the standard deviation 5.1.4 Step 4: Formulate the decision rule The decision rule is formulated by finding the critical values of Z from Appendix D. Since this is a two-tailed test, half of 0.01, or 0.005, is placed in each tail. The area where H0 is not rejected, i.e. area between the two tails, is 0.99. Appendix D is based on half of the area under the curve, or 0.5. Then 0.5 0.005 is 0.495, so 0.495 is the area between 0 and the critical value. The value nearest to 0.495 is 0.4951. Then read the critical value in the row and column corresponding to 0.4951. It is 2.58. Decision rule: Reject H0 if the computed Z value is not between -2.58 and +2.58. Do not reject H0 if Z falls between -2.58 and +2.58. Figure 8 Two-tailed test 5.1.5 Make a decision and interpret the result Compute Z and apply the decision rule to decide whether to reject H0. The mean number of watches produced weekly for last year is 203.5. The standard deviation of the population is 16 watches. Because 1.55 does not fall in the rejection region, H0 is not rejected. We conclude that the population mean is not different from 200. So we would report to the CEO that the sample evidence does not show that the production rate at the Swiss plant has changed from 200 per week. The difference of 3.5 units between the historical weekly production rate and the mean number of watches produced weekly for last year can reasonably be attributed to sampling error. Figure 9 Rejection regions for the two-tailed test So did we prove that production rate is still 200 per week? No! Failing to disprove the hypothesis that the population mean is 200 is not the same thing as proving it to be true. 5.2 P-value In Hypothesis Testing Definition P-value is the probability of observing a sample value as extreme as, or more extreme than, the value observed, given that the null hypothesis is true. How confident are we in rejecting the null hypothesis? This approach reports the probability of getting a value of the test statistic at least as extreme as the value actually obtained. This process compares the probability called the P-value, with the significant level. If the P-value If the P-value > significant level, H0 is not rejected. A very small P-value, such as 0.0001, indicates that there is little likelihood the H0 is true. If a P-value of 0.2033 means that H0 is not rejected, there is little likelihood that it is false. Figure 10 P-value P-value Interpretation Less than 0.1 Some evidence that H0 is not true Less than 0.05 Strong evidence that H0 is not true Less than 0.01 Very strong evidence that H0 is not true Less than 0.001 Extremely strong evidence that H0 is not true The probability of finding a Z value of 1.55 or more is 0.0606, found by 0.5 0.4394. The probability of obtaining an greater than 203.5 if  µ = 200 is 0.0606. To compute the P-value, we need to be concerned with the region less than -1.55 as well as the values greater than 1.55. The two-tailed P-value is 0.1212, found by 2(0.0606). The P-value of 0.1212 is greater than the significance level of 0.01, so H0 is not rejected. Chapter Review The Central Limit Theorem states that the sampling distribution of the sample means is approximately normal. The standard error refers to the standard deviation of the sampling distribution of the sample mean. We use t distribution when the sample is less than 30 observations and the population standard deviation is not known. The necessary sample size depends on 1) level of confidence wanted ; 2) margin of error the researcher will tolerate; 3)variability in the population.   By rejecting a true null hypothesis, we committed a Type I error. We would reject the null hypothesis when it is highly improbable that a computed Z value this large is due to sampling variation. What You Need To Know Confidence interval: A range of values constructed from sample data so that the population parameter is likely to occur within that range at a specified probability. Hypothesis: A statement about a population parameter developed for the purpose of testing. Hypothesis testing: A procedure based on sample evidence and probability theory to determine whether the hypothesis is a reasonable statement. Critical value: The dividing point between the region where the null hypothesis is rejected and the region where it is not rejected. P-value: The probability of observing a sample value as extreme as, or more extreme than, the value observed, given that the null hypothesis is true. Work Them Out 1. The average number of days in outdoors assignments per year for salespeople employed by an electronic wholesaler needs to be estimated with a 0.90 degree of confidence. In a small sample, the mean was 150 days and the standard deviation was 14 days. If the population mean is estimated within two days, how many salespeople should be interviewed? A 134 B 152 C 111 D 120 2. A random sample of 85 staff of managerial grade revealed that a person spent an average of 6.5 years on the job before being promoted. The standard deviation of the sample was 1.7 years. Using the 0.95 degree of confidence, what is the confidence interval for the population mean? A 6.19 and 6.99 B 6.15 and 7.15 C 6.14 and 6.86 D 6.19 and 7.19 3. The mean weight of lorries travelling on a particular highway is not known. A state highway authority needs an estimate of the mean. A random sample of 49 lorries was selected and finds the mean is 15.8 tons, with a standard deviation of 3.8 tons. What is the 95 per cent interval for the population mean? A 14.7 and 16.9 B 14.2 and 16.6 C 14.0 and 18.0 D 16.1 and 18.1 4. A bank wants to estimate the mean balances owed by platinum Visa card holders. The population standard deviation is estimated to be $300. If a 98% confidence interval is used and an interval of $75 is desired, how many platinum cardholders should be taken into sample? A 84 B 82 C 62 D 87 5. A sample of 20 is selected from the population. To determine the appropriate critical t-value, what number of degrees of freedom should be used? A 20 B 19 C 23 D 27 6. If the null hypothesis that two means are equal is true, where will 97% of the computed z-values lie between? A  ± 2.58 B  ± 2.38 C  ± 2.17 D  ± 1.68 7. Suppose we are testing the difference between two proportions at the 0.05 level of significance. If the computed z is -1.57, what is our decision? A Reject the null hypothesis B Do not reject the null hypothesis C Review the sample D Own judgment 8. The net weights of a sample of bottles filled by a machine manufactured by Dame, and the net weights of a sample filled by a similar machine manufactured by Putne Inc, are (in grams): Dame: 5, 8, 7, 6, 9 and 7 Putne: 8, 10, 7, 11, 9, 12, 14 and 9 Testing the claim at the 0.05 level that the mean weight of the bottles filled by the Putne machine is greater than the mean weight of the bottles filled by the Dame machine, what is the critical value? A 2.215 B 2.175 C 1.782 D 1.682 9. Which of the following conditions must be met to conduct a test for the difference in two sample means? A Data must be of interval scale B Normal distribution for the two populations C Same variances in the two populations D All the above are correct 10. Take two independent samples from two populations in order to determine if a statistical difference on the mean exists. The number for the first sample and the number in the second sample are 15 and 12 respectively. What is the degree of freedom associated with the critical value? A 24 B 25 C 26 D 27 SHORT QUESTIONS A consumer group would like to estimate the mean monthly water charge for a single family house in June within $5 using a 99% level of confidence. Similar research has found that the standard deviation is estimated to be $25.00. What would be the sample size? The manager of the Kingsway Mall wants to estimate the mean amount spent per shopping visit by customers. A sample of 20 customers reveals the following amounts spent. $48 $42 $46 $51 $23 $41 $54 $37 $52 $48 $50 $46 $61 $61 $49 $61 $51 $52 $58 $43 What is the best estimate of the population mean? Determine a 99 per cent confidence interval. Interpret the result. Would it be reasonable to conclude that the population mean is $50? What about $60? ESSAY QUESTION 1. ABC Film Ltd knows that a certain favourite movie ran an average of 84 days, and the corresponding standard deviation was 10 days. The manager of New Westminster district was interested in comparing the movies popularity in his region with that in all of Canadas other theatres. He randomly selected 70 theatres in his region and found that they showed the movie for an average of 82 days. (a) State appropriate hypotheses for testing whether there was a significant difference in the length of the pictures run between theatres in the New Westminster district and all of Canadas other theatres. (b) Test these hypotheses at a 1% significance level.

Wednesday, September 4, 2019

The Wedding of Sir Gawain and Dame Ragnell :: Essays Papers

The Wedding of Sir Gawain and Dame Ragnell Character Analysis Sir Gawain is one of the more famous Knights of the Round Table in Arthurian legends. Various authors have written about Gawain including the anonymous author of "The Wedding of Sir Gawain and Dame Ragnell." The reader gets to know Gawain’s character through its development throughout the story. Gawain shows his virtue and courteous manner through his words and also through his actions. His physical appearance and dress are never mentioned so there are no clues to his personality in this regard. Gawain’s steadfast manner in the face of adversity is further testament to his worthiness as a knight. The first glimpse we have of Gawain in the story is shortly after King Arthur returns from his hunt. Gawain is the only person to whom Arthur confides his misadventure with Sir Gromer Somer Jour. Arthur’s apparent trust of Gawain to carry his burden proves that he trusts Gawain’s counsel and that Gawain will be discreet about the king’s troubles. Gawain enforces this belief when he says, "I am not that man that wold you dishonor / Nother by evin ne by moron"(329). In contrast to Arthur who breaks his oath to Sir Gromer that "I shold nevere telle it to no wighte"(331) by hoisting his problems on another, Gawain’s character exhibits a more honorable disposition by immediately offering his assistance. The juxtaposition of these two contrasting characters, namely Arthur and Gawain, serves to display each of their attributes in a clearer, more defined light. Even though Arthur does not necessarily act in a cowardly manner, neither does he measure up to Gawainâ €™s virtuous nature. After Arthur’s encounter with Dame Ragnell later in the story, he returns to his home even more discouraged than when he set out. Gawain, upon meeting with the dejected king, swears that "I had lever myself be dead, so not I thee"(335) when he hears Arthur’s foreboding prophesy that he will surely die. Gawain backs up his loyalty not only with mere words but with his actions as well. When faced with the prospect of taking a hideous wife to save his lord’s life, Gawain does not hesitate but says that he will "†¦wed her and wed her again, / Thoughe she were a fend, / Though she were as foulle as Belsabub, / Her shall I wed, by the rood, / Or ellses were not I your frende"(335).

Tuesday, September 3, 2019

Karl Marx and Capitalist Alienation Essay -- Alienation Marxism Marxis

The concept of alienation plays a significant role in Marx's early political writing, especially in the Economic and Philosophical Manuscripts of 1848, but it is rarely mentioned in his later works. This implies that while Marx found alienation useful in investigating certain basic aspects of the development of capitalist society, it is less useful in putting forward the predictions of the collapse of capitalism. The aim of this essay is to explain alienation, and show how it fits into the pattern of Marx's thought. It will be concluded that alienation is a useful tool in explaining the affect of capitalism on human existence. In Marx's thought, however, the usefulness of alienation it is limited to explanation. It does not help in either predicting the downfall of capitalism, or the creation of communism. Marx takes his idea of alienation from Feuerbach, who shows the alienation of man from God. Briefly, Feuerbach's argument is that God is created by man as the 'projection of man's species-essence, the totality of his powers and attributes raised to the level of infinity' (1). Religion alienates man by reversing the relationship between the subject and predicate - the Deity is supreme over man, even though it is created by man. Leszek Kolakowski suggests that the clearest material example of religious alienation is blood sacrifice. In general, therefore, alienation of man is the process that separates man from part of himself. In Feuerbach, the separation is between man and the god created in man's image. In Marx, as shall be seen, alienation is the separation between man and his life-activity, his product, society and the species. Each of these four relations can be seen as one aspect of man being separated from himself. .. ...(rather than local) being. (13) Thus, although alienation provides an understanding of the problems of capitalism, it does not provide a means of escaping it. 1. L. Kolakowski, Main Currents of Marxism, pp 115. 2. L. Kolakowski, Main Currents of Marxism, pp 115. 3. B. Ollman, Alienation, pp 133. 4. S. Avineri, Karl Marx: Social and Political Thought. 5. This point is also put forward by Herbert Marcuse. 6. L. Kolakowski, Main Currents of Marxism. 7. K. Marx, Economic and Philosophical Manuscripts. 8. B. Ollman, Alienation, pp131. 9. G. A. Cohen, Karl Marx's Theory of History: A defence. 10. H. Marcuse, Reason and Revolution. 11. K. Marx, Economic and Philosophical Manuscripts. 12. B. Ollman, Alienation, pp138. 13. Spiritual in the sense of human fulfilment in work, rather than any religious sense. 14. K. Marx, The German Ideology, pp56. Karl Marx and Capitalist Alienation Essay -- Alienation Marxism Marxis The concept of alienation plays a significant role in Marx's early political writing, especially in the Economic and Philosophical Manuscripts of 1848, but it is rarely mentioned in his later works. This implies that while Marx found alienation useful in investigating certain basic aspects of the development of capitalist society, it is less useful in putting forward the predictions of the collapse of capitalism. The aim of this essay is to explain alienation, and show how it fits into the pattern of Marx's thought. It will be concluded that alienation is a useful tool in explaining the affect of capitalism on human existence. In Marx's thought, however, the usefulness of alienation it is limited to explanation. It does not help in either predicting the downfall of capitalism, or the creation of communism. Marx takes his idea of alienation from Feuerbach, who shows the alienation of man from God. Briefly, Feuerbach's argument is that God is created by man as the 'projection of man's species-essence, the totality of his powers and attributes raised to the level of infinity' (1). Religion alienates man by reversing the relationship between the subject and predicate - the Deity is supreme over man, even though it is created by man. Leszek Kolakowski suggests that the clearest material example of religious alienation is blood sacrifice. In general, therefore, alienation of man is the process that separates man from part of himself. In Feuerbach, the separation is between man and the god created in man's image. In Marx, as shall be seen, alienation is the separation between man and his life-activity, his product, society and the species. Each of these four relations can be seen as one aspect of man being separated from himself. .. ...(rather than local) being. (13) Thus, although alienation provides an understanding of the problems of capitalism, it does not provide a means of escaping it. 1. L. Kolakowski, Main Currents of Marxism, pp 115. 2. L. Kolakowski, Main Currents of Marxism, pp 115. 3. B. Ollman, Alienation, pp 133. 4. S. Avineri, Karl Marx: Social and Political Thought. 5. This point is also put forward by Herbert Marcuse. 6. L. Kolakowski, Main Currents of Marxism. 7. K. Marx, Economic and Philosophical Manuscripts. 8. B. Ollman, Alienation, pp131. 9. G. A. Cohen, Karl Marx's Theory of History: A defence. 10. H. Marcuse, Reason and Revolution. 11. K. Marx, Economic and Philosophical Manuscripts. 12. B. Ollman, Alienation, pp138. 13. Spiritual in the sense of human fulfilment in work, rather than any religious sense. 14. K. Marx, The German Ideology, pp56.

Monday, September 2, 2019

Adaptive Thresholding :: essays research papers

Summary We have to develop an adaptive thresholding system for greyscale image binarisation. The simplest way to use image binarisation is to choose a threshold value, and classify all pixels with values above this threshold value as white and all other pixels as black. Thresholding essentially involves turning a colour or greyscale image into a 1-bit binary image. If, say, the left half of an image had a lower brightness range than the right half, we make use of Adaptive Thresholding. Global thresholding uses a fixed threshold for all pixels in the image and therefore works only if the intensity histogram of the input image contains distinct peaks corresponding to the desired subject and background. Hence, it cannot deal with images containing, for example, a strong illumination gradient. Local adaptive thresholding, on the other hand, selects an individual threshold for each pixel based on the range of intensity values in its local neighbourhood. This allows for thresholding of an image whose global intensity histogram doesn't contain distinctive peaks. The assumption behind method is that smaller image regions are more likely to have approximately uniform illumination, thus being more suitable for thresholding. Firstly, we develop a method based on the local row average to binarise the current line using that threshold. We then extend this technique to a moving window of different sizes. Method For the first part of the assignment, we develop a method based on the local row average to binarise the current line using that threshold. We consider each individual row at a time; calculate the average brightness value for that row based on the brightness values of all the pixels in that row. We then use this average value to binarise that row. We then proceed to the next row and so on. In this way we binarise the whole image. For the second part of the assignment, we make a window of user defined size around the centre pixel under consideration, calculate the average value for all the pixels in this window and then binarise that centre pixel using this average value as the threshold value. We continue this procedure till we binarise the whole image. For the pixels towards the edges of the image, we check for the number of pixels preceding the centre pixel. If this number is less than half the window size, we modify our code accordingly to take care so that we calculate the average value for that centre pixel.

Sunday, September 1, 2019

Persepolis Anaylis of Kim Wilde

Amira Black 10-29-12 Period: 2nd Kim Wilde Analysis In Kim Wilde, it’s been a year after her Uncle Taher dies, Iran reopens its borders. The family gets their passports. Marjane wants the family to take a vacation together but her parents tell her that they need a vacation alone. They tell her that they are going to Turkey. They promised to bring her back Western things, like posters of Kim Wilde and Iron Maiden. Marjane’s father says that he really likes Iron Maiden and the marjane and her mother couldn’t believe it.In Turkey, the Satrapis go to a record store and buy the posters. They then must think of ways to get the posters back through traditions. None of the ideas seemed to work Marjane’s mother was being creative and she was stitching the posters into a big coat that Mr. Satrapi was wearing. He was feeling silly in the big coat, but when they get back to iran , they reassured the agent there that they have nothing unlawful and the agent lets them p ass. When they get back to the house, Marjane’s mother begins passing out the presents they had brought her.They give her a denim jacket, a Michael Jackson button, and a pair of Nike sneakers. They took the posters out of the coat and Marjane was very happy. She says, â€Å"I love Turkey. † She puts the posters in her room, wears the sneakers and the jacket, and plays air guitar just like Iron Maiden. She tells her mother that she is going out, just down the street, and thinks that her mother is more tolerant than most other mothers who would not let their daughters go out alone at such a young age.Marjane goes to the corner and buys tons of tapes from men selling Western goods at the black market. She was being sly about it until a group of women stops her. They are members of the women’s branch of the Guardians of the Revolution. They question her on her Western dress. They ask her why she is wearing punk sneakers, and Marji secretly thinks they know nothing o f what punk really is. They bully her for wearing a Michael Jackson button and she tries to tell them it is a Malcolm X button because marjane states: â€Å"Back then, Michael Jackson was still black. They pull her scarf over her head and terrorized her to take her to the committee, the â€Å"HQ of the Guardians of the Revolution. † Marjane lies and tells them that her mother is dead and that her stepmother is very cruel and will burn her with an iron or send her to an orphanage if she does not go home. The women believe her, they let her go. Back at home, she does not tell her mother what has happened and goes to her room and plays her new tapes loud. She sings: â€Å"We’re the kids of America†

Case Study for Midsouth Chamber

In continuance of the case of Midsouth Chamber of Commerce, the organization has appointed Sage Niele as a new Vice President of Operations and Chief Financial Official of the company. During her initial period, she looked back and contemplated about the decision she had made to accept the positions and her reasons behind it. Alongside with her internal investigation, the backstory of the significant players in the preceding case was told. The organization’s difficulties with finding a system to replace UNITRAK was described in the case.Throughout their search, the company has found DMA’s software as an alternative to UNITRAK. When the new system was implemented, plenty of flaws and glitches were found that caused several difficulties for Midsouth Chamber of Commerce. With MSCC’s signed contract with DMA, they have allowed DMA to take over and handle the installation and support of the new system. The decision made it difficult for MSCC to recover the system by t he end of the case. This left Sage Niele, the new Vice President, tried to find new ways to repair the damage done to an already defective system.Unnoticed Mistakes in Midsouth Chamber of Commerce This review of Midsouth Chamber of Commerce’s history, exposed a number of problems and errors found with the organization’s information systems and as well as its management. First was with the implementation of UNITRAK system. When the UNITRAK’s president, Greg Ginder, was invited to give a short demonstration of the system’s capabilities, Ed Wilson Vice President of Public Affairs of MSCC have agreed with Leon Lassister Vice President of Marketing/Membership to purchase and implement the UNITRAK software without completing the demonstration and testing the UNITRAK system.That quick decision later lead to discovering several problems with the UNITRAK system. The system could not fulfill requests for lists and labels for mailings. The word processing, payment a nd invoicing, data changes, and list management were very difficult during that time. With Kovecki’s frustration with UNITRAK software, he was not cooperative with Lassiter. He does not give him information regarding the conversion of the new system and he was not very helpful with the staff members because he always try to avoid them.Issues with the system remained and later on the UNITRAK experienced financial problems and filed for bankruptcy. With no technical support for the system, MSCC decided to hire an outside consultant, Zen Consulting, to help assist in the maintenance and support of the software. After UNITRAK, came the implementation of Data Management Associate’s (DMA) software. Another decision was made quickly in implementing a new system. Dick Gramen, the new Systems Analyst, failed to read and fully understand the contract provided by DMA, which outlined what DMA were willing to provide and what MSCC must guaranteed.The contract was signed by the pres ident of the company, Jack Wallingford, without being reviewed by any other staff member or the corporate counsel. Troubles have raised with the implementation of DMA software. DMA encountered substantial problems converting the membership database from UNITRAK into the DMA custom software package. MSCC and DMA’s working relationship deteriorated due to many problems not being fixed and the lack of cooperation with DMA.From this research, MSCC’s history was reviewed and specified questions were answered to analyze and gather facts that seems to cause problems to Midsouth Chamber of Commerce. Firstly, the organization’s poor operational decisions for their information systems. There was no opinion or guidance from an experienced information system professional. Secondly, the lack of proper evaluation of the research. Even if a research was performed for the new system, a research that was not reviewed, was not enough to quantify the decision to implement a system .Lastly, the mistake of not checking the content of the business contract. In any organization, it is essential that a contract needs to be reviewed by all the staff members, corporate counsel, and officers before it could be signed and implemented. Based on all the facts gathered from the research, MSCC must work on having a good and effective communication with all the stakeholders. This would avoid poor decision, unevaluated research and contract that later lead to future pitfalls and mistakes. MethodThe case was examined thoroughly to determine the cause of difficulties and errors with the organization’s information system. The history of Midsouth Chamber of Commerce was investigated and reviewed by the author to understand how well the organization manages their information systems. Several questions were gathered and carefully answered to strategically associate the findings and analyze the issues. Results The review of Midsouth Chamber of Commerce’s history and the answers for the specified questions helped gathered facts to analyze what were the real problems and what causes it.The outcome of the study have identified the following problems: organization’s poor operational decisions for their information systems; lack of proper evaluation of the research; and the mistake of not checking the content of the business contract. Discussion As mentioned, having a good and effective communication is very essential in every organization. The purpose of this study was to show what the organization was lacking, that made them experience numbers of difficulties with their information systems. Also, to demonstrate what can be done to resolve it.With the problems identified in this case, the main cause was found and it was the lack of good communication between the stakeholders. The decision to purchase an unreliable systems like UNITRAK and DMA, the research and contract not being reviewed prior to signing and implementation of the systems, al l boils down to MSCC’s poor communication. Why â€Å"lack of good communication† was the important finding of this case? According to ManagementStudyGuide. com: Thus, we can say that â€Å"effective communication is a building block of successful organizations†.In other words, communication acts as organizational blood. The importance of communication in an organization can be summarized as follows: 1. Communication promotes motivation by informing and clarifying the employees about the task to be done, the manner they are performing the task, and how to improve their performance if it is not up to the mark. 2. Communication is a source of information to the organizational members for decision-making process as it helps identifying and assessing alternative course of actions.3. Communication also plays a crucial role in altering individual’s attitudes, i.e. , a well-informed individual will have better attitude than a less-informed individual. Organizatio nal magazines, journals, meetings and various other forms of oral and written communication help in molding employee’s attitudes. 4. Communication also helps in socializing. In today’s life the only presence of another individual fosters communication. It is also said that one cannot survive without communication. If Midsouth Chamber of Commerce would apply this finding to their organization, there would be a possibility to salvage their current and future information systems.